Serie di inclinometri monoassiali con uscita dati in tensione in corrente RS485 ecc.
Output Interface | RS232/RS485/CAN/CANOpen/Switch | 0.5~4.5VDC/4~20mA |
Measurement range | ±5°?±10°?±15°?±30°?±45°?±60°?±90°?±180°?0~360° | |
Accuracy | ±0.07°@-15~50? | ±0.15°@-15~50? |
Non-linearity | ±0.03° | ±0.05° |
Resolution | 0.002° | 0.005° |
Repeatability | ±0.02° | ±0.05° |
Offset | ±0.02° | ±0.05° |
Cross-axis sensitivity | ±0.2%FS | ±0.2%FS |
Measuring axis | 1 or 2 axis | |
Bandwidth | Default 3Hz?5Hz?10Hz available | |
Response time | 5ms?no filtering? | 10ms?no filtering? |
Refresh rate | Default 5Hz?max. 50Hz | 50Hz |
Cold start warming time | Less than 60s | |
Interface features | RS232: 9600bps (adjustable) 8 data bits1start bit 1 stop bit | Voltage output:0.5~4.5VDC; Internal resistance 0.3?; Drive current (max.) 15mA |
RS485: 9600bps (adjustable) 8 data bits1start bit 1 stop bit No matched resistanc | ||
CAN2.0: according to ISO11898-2standard 40k~1MBit/s baud rate adaptive standard frame and extended frame format No matched resistance | ||
CANOpen: according to DS301standard40k~1MBit/s baud rate No matched resistance | Currentoutput:4~20mA; Internal resistance 50M?; load impedance 150~650? | |
Switch output: Darlington OC outputloadwith 1A @9?36VDC alarm point can be pre-set in factory | ||
Power consumption | RS232/RS485 Output:9~36VDCcurrent ?50mA@24VDC | 16~36VDCcurrent?30mA (no-load?@24VDC |
CAN/CANOpen Output:9~36VDCcurrent?80mA@24VDC | ||
Switch output:9~36VDCcurrent?50mA?no-load @24VDC | ||
Operation temperature range | -40?85? | |
Storage temperature range | -40?85? | |
EMC | According to EN 61000/GBT17626 | |
Insolation | ?100M? | |
MTBF | 10 years | |
Shock | 100g@11ms three-axis half- sine | |
Vibration | 8grms?20?2000Hz | |
Protection | IP67 | |
Connector | M12 5-Pin socket | |
Weight | ?200g (no connector or cable) |